Siemens 2010 Tango - Manual (Page 35)

External outgoing calls
25
kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Manually inserting a pause
If you repeatedly get the busy symbol following automat-
ic dialling from the telephone directory, e.g. after the
country code, you can enter a pause (three seconds), e.g.
between the exchange or country code and the call
number:
No answer or line busy
Redial
Repeating the last number dialled
Redialling one of the last five numbers selected
Your Gigaset 2010 Tango memorises the last five num-
bers dialled. You can dial these five numbers without
having to re-enter them or you can correct them with
the
Q key.
o
O
o
Press the O key. “P“ is shown on the display.
:
0043P123456
f
N
b
F
Replace the handset in the base station or charging unit.
The call is disconnected.
or
a Disconnect call (“on-hook“).
You can use the redial function to repeat this
call.
c Press the off-hook key. You will hear the dial tone.
O The last number dialled will be redialled. You will hear the
ring tone.
O Keep pressing the key until the required number appears
on the display of the mobile unit.
Q
Press the
Q
key to correct the number if necessary.
c The number is dialled. Ringing tone is then heard.