Siemens 2010 Tango User Manual
Page 14
Stepwise start-up
4
kap02.fm5
18.7.99
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Step 6: Check signalling method
Telephone lines can use the following signalling methods:
●
dial pulsing (DP)
●
dual-tone multifrequency signalling (DTMF)
The factory default for your Gigaset 2010 Tango is DTMF.
Checking your own telephone’s signalling method
Setting the phone to dial pulsing (DP)
You can now make external calls with your Gigaset 2010
Tango.
c
Press the off-hook key (corresponds to picking up the
handset on an ordinary phone). You will hear the dial
tone.
o
Press any digit, e.g. 2. If you can still hear the dial tone
you will have to set the signalling method to dial pulsing
(DP).
B
#1
Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O
033
B
Set dial pulsing (DP).
The other signalling method settings are intend-
ed for the operation of the Gigaset 2010 Tango
in telephone systems (➔ page 16 ).