Siemens 2010 Tango - Manual (Page 34)

External outgoing calls
24
kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
External outgoing calls
Calling external subscribers
You will hear the ring tone.
Dialling with call number checking (en-bloc dialling)
En-bloc dialling allows you to check the external call
number entered before it is dialled and correct it, if nec-
essary, using the
Q
key before the line is seized.
c Press the off-hook key. You will hear the dial tone.
o
Enter the desired call number on the dialling keypad. The
number you have entered is shown on the display, e.g.:
:
123456
f
N
b
F
The maximum length of call numbers that you
can enter is 22 digits.
o
Enter the desired call number. The number you have
entered is shown on the display, e.g.:
:
Q
You can correct the number entered using the Q key.
c Press the off-hook key within 30 seconds to seize the
line. The call number is dialled. You will then hear the ring
tone.
or
a
You can also leave the dialling mode without dialling by
pressing the on-hook key.
123456
f
N