Symbol Technologies P470 User Manual
Page 68
4-8
P470/370 RF Scanner Product Reference Guide
Beeper Indications / Default Application Error Codes
list beep sequence and their meanings for standard beeps programmed into the
scanner. Other applications written for the scanner can have their own beep sequences and
therefore are not listed in this table. See your System Administrator for beep sequences
and their meanings.
For additional information on Error Codes, see
Table 4-4. Beeper Indications
Beeper Sequence
Indication
Default Application
Error Codes
Standard Use
Short high tone
A bar code symbol was decoded (if
decode beeper is enabled).
N/A
4 Beeps - long low
A host transmission error occurred. Data
was not successfully sent to the host
device. This occurs if a unit is not
properly configured. Check option
settings.
Error code 003
Error code 009
Error code 018
Error code 247
Error code 249
Error code 253
5 Beeps - low tone
Convert or format error.
Error code 002
Error code 008
Hi/Hi/Hi/Lo tone
RS-232 receive error.
Error code 005
4 Beeps - short Hi
Battery requires recharging.
Low Battery
4 Beeps - Lo/Hi/Lo/Hi An RF transmission error has occurred.
Move closer to the cradle and re-scan
the bar code.
Error code 015
Error code 016
Error code 017
Error code 024
Parameter Menu Scanning
Short high tone
Correct entry scanned or correct menu
sequence performed.
N/A