Symbol Technologies P470 - Manual (Page 44)

3-12
P470/370 RF Scanner Product Reference Guide
3. System Code Updates the scanner operating system (Firmware). To enter this
mode using the key pad, select this option on the system menu.
Press the key to confirm the choice (Yes) or the
key to cancel the choice (No).
OR
To enter this mode from an application without entering the
system menu or entering key strokes, scan the bar code below.
Place the scanner in the cradle before initiating the download
from the PC Utility.
After the download is complete, the system menu is exited and
the application initiates.
To exit this mode and prevent the download of new firmware,
press and hold the key for 30 seconds. In addition,
power to the cradle must be cycled (powered off then on) before
it will communicate with the scanner again.
Option Description
Load New System Code
=YES
=NO
System Code
Place unit in cradle
on PC start download