Symbol Technologies P470 - Manual (Page 24)

2-4
P470/370 RF Scanner Product Reference Guide
7. Connect the appropriate line cord to the power supply and into an AC receptacle.
8. The indicator light on the cradle blinks, signifying successful power-up.
9. Scan the appropriate Synapse bar codes to set up the Synapse cable for your
specifications.
10. Rotate the antenna to the vertical position.
Wand Emulation, OCIA, OCR, Keyboard Wedges
See the appropriate Synapse cable instructions. An adapter cable is required.
Wall Mounting
Before wall-mounting the cradle, the scanner support tab must be changed from the desk-
mount position to the wall-mount position.
1. Lift the scanner support tab out of the top part of the cradle and replace it in the
wall-mount position.
Figure 2-4. Scanner Support Tab
2. Seat the cables from the bottom of the cradle in the grooves along the length of it
so that the bottom of the cradle is smooth.
Figure 2-5. Placement of Cables
Desk Mount Wall Mount
Cable
Grooves