Symbol Technologies P470 User Manual
Page 25
2-5
Set Up
3.
Fasten the two screws provided into the wall where the cradle will hang, leaving
about 1/8” (0.3 cm) of the screw outside the wall for the cradle’s wall mounting
sockets (A template is provided for you in the PL 370/470 Quick Reference Guide
p/n 72-38494-xx).
4.
Place the cradle over the screw heads and slide down until it fits into place. Slight
pressure upwards should not move the cradle.
Figure 2-6. Securing Cradle to Wall
5.
Position the antenna vertically (pointing toward the ceiling).
6.
Place the scanner in the cradle.