Symbol Technologies P470 - Manual (Page 208)

Quick Startup Instructions
Below is an index of Quick Startup Instructions to help get you up and going quickly. The index is listed
in a step by step order beginning with step 1, Setting up the System.
Mandatory steps are designated by an asterisk (*). If an item has multiple pages referenced, the most
important reference is in bold.
PRG Page
1. Setting Up the System
• Connecting the cradle to a host * 2-1
- RS-232 connection 2-2
- Synapse connection (keyboard wedge, USB, etc.) 2-3
• Charging the battery * 1-2, 2-8
• Pairing the scanner with the cradle * 2-6
- RF channel 3-8, 5-13, C-1
- Coexisting in Spectrum24 environments 2-7
2. Using the Default Applications
• Overview of Scan and Transmit application* 3-2
• Keypad operation 3-2, 3-3, 3-26
• Eliminating repetitive scanning 3-4
• Selecting the host communication protocol 3-2, 3-8, 5-8
- RS-232 baud rate 5-83
3. Programming an Advanced Data Formatting Rule Using 123Scan 3-17
• Suffix values (appending Enter key and Tab) 3-18
4. Troubleshooting Problems
• Troubleshooting table 4-2
• Communication errors 3-5, D-2
• Beeper indications and default application error codes 4-8
• Cradle LED indications 2-10
72-38495-03
Revision C — December 2003
Symbol Technologies, Inc. One Symbol Plaza, Holtsville N.Y. 11742-1300
http://www.symbol.com/manuals