Chapter 2 set up, Introduction, Unpacking – Symbol Technologies P470 User Manual
Page 21: Setting up the cradle, Connecting to a host, Chapter 2. set up, Connecting to a host -1, Chapter 2, set up
2-1
Chapter 2
Set Up
Introduction
This chapter covers the procedures for setting up the RF scanner and its accessories.
Unpacking
Remove the scanner from its packing and inspect it for damage. If the scanner was
damaged in transit, call one of the telephone numbers listed in the section
on page xi. KEEP THE PACKING. It is the approved shipping container and should
be used if you ever need to return your equipment for servicing.
Setting Up the Cradle
The basic steps to set up the cradle are listed below and described in more detail in the
following sections.
•
connecting the cradle to a host
•
mounting the cradle, if desired
•
pairing the scanner to the cradle.
Connecting to a Host
With some host types, the scanner is unable to answer host terminal polls if the appropriate
host type is not selected. This may result in an error message generated by the host. To
correct this situation, select the proper parameter set and initialize the host terminal. See
for more information.