Sharp JW-21MN User Manual
Page 37
9-5
[3] Data transmission between master PC and slave PC
Providing synchronous transfer gives positive data communication.
[An example of synchronized transfer by OUT instruction]
- 00000 is turned "ON" at the master station side.(OUT 02000 is a self-holding circuit.)
- When 02000 is turned "ON" at the slave station side, OUT 02030 is also turned "ON." This is sent
back to the master station side.
Program in master station
Program in slave station
Master station (PC00)
Slave station (PC01)
Send
: Receive
00000
02000
F-44
02030
02000
02000
02030