Sharp JW-21MN - Manual (Page 12)

2-3
2-3 Treatment
For ventilation, holes are provided in the cabinet to prevent a temperature rise. Do not block the
ventilation holes. Good ventilation is necessary.
Never allow a liquid such as water and chemical solution and a metallic object like a copper wire
inside the JW-21MN to avoid a possible hazard. Otherwise, it may be a cause of machine trouble.
When a trouble or abnormal condition such as overheat, fume, or smoke is met, stop the operation
immediately, and call your dealer or our service department.
2-4 Static electricity
In extremely dry circumstances, the human body may have excessive static current. This excessive
static current may damage parts in the JW-21MN's PC board. Therefore, prior to accessing the JW-
21MN, touch your hand to a grounded piece of metal to discharge the static current in your body.
2-5 Maintenance
Use a clean, dry cloth when cleaning the JW-21MN. Do not use volatile chemicals such as thinner or
alcohol as it may result in deformation and color fading.
2-6 Allocation of relay number
JW20/JW20H/JW30H which installs JW-21MN are laid out 16 points to the JW-21MN as a relay
number. These 16 points are dummy area which is not used in JW-21MN.