Sharp OZ-800 - Manual (Page 68)

66 Schedule & Calendar
3. Specify the date by using .
4. Press (or tap “OK”).
The Go to Specific Date screen turns into the Daily Index screen for the
specified date.
To display the current schedules
1.
Tap “Today”.
Or
Press , select “Go to Specific Date...” by pressing , then tap
“Today” followed by “OK” .
Modifying a Schedule & Calendar entry
See page 26 for the basic operations.
Setting a schedule alarm
You can set an alarm for each Schedule & Calendar entry.
1.
Open the Edit screen.
2.
Tap “Alarm”.
The Alarm screen appears.
3.
Check the alarm check box by pressing .
4.
Press and specify the reminder time in increments of ten by pressing
(or by tapping “ ” “ ”).
The figure counts up each time is pressed (or “ ” is tapped) and counts
down each time “ ” is tapped.
Alarm check box
Alarm ON
Alarm OFF
Minutes box
Unit menu
00.Introduction.book Page 66 Friday, March 15, 2002 3:17 PM