Sharp OZ-800 - Manual (Page 14)

12 Getting Started
3. Insert two AAA batteries, making sure to position them correctly according to the
plus (+) and minus (-) terminals, as illustrated below.
4.
Replace the battery compartment lid.
5.
Slide the battery replacement switch to the “NORMAL OPERATION” position.
Follow the setup procedures described in “Setting up the unit” on page 13.
Initializing
1.
While pressing and holding , press and release the RESET button on the
back of the unit using the stylus or similar object.
A message appears.
2. Release .
3.
Highlight “OK” by pressing and press (or tap “OK”).
Note: The following data will be lost when the batteries are replaced or
extremely low. It is recommended to copy important data to the
Mybox folder. (See page 34, 50)
• E-Mail messages in the Inbox folder (E-Mail application).
• Attachments in the Inbox folder (Attachment Viewer application).
00.Introduction.book Page 12 Friday, March 15, 2002 3:17 PM