Sharp OZ-800 - Manual (Page 106)

104 Other Applications
• When you complete the settings, tap “OK” on the Settings screen. The screen
returns to the Main menu screen.
• The settings you made will not be stored unless you tap “OK” on the Settings
screen.
Setting the Start-up screen/Opening screen/Auto-off
function/Backlight function
Highlight “Start-up/Auto-off” by pressing and press .
The Start-up/Auto-off screen appears.
Selecting the Start-up screen:
You can select the start-up screen when the unit is turned on.
1.
Highlight “Start-up” by pressing and press .
2. Select the desired start-up screen by pressing and press .
Setting the Opening screen:
You can select whether the opening screen is displayed or not when the unit is
turned on.
1. Highlight “Opening” by pressing .
2.
Select the “On” or “Off” radio button by pressing and press .
Adjusting the Auto-off function:
To conserve the battery power, the unit will turn itself off if it has not been used for
a set number of minutes.
1.
Highlight “Auto-off” by pressing and press .
2.
Select the desired auto-off time by pressing and press .
Note: In order to avoid accidentally interrupting data transfers, the Auto-off
function is automatically disabled while communicating with your PC.
Adjusting the Backlight function
1.
Highlight “Backlight” by pressing and press .
2.
Select the desired backlight time by pressing and press .
After setting the above, highlight “OK” by pressing and press (or tap
“OK”). The screen returns to the Settings screen. Tap “OK” to store the settings.
00.Introduction.book Page 104 Friday, March 15, 2002 3:17 PM