Sharp DV-RW550U - Manual (Page 41)

41
Recording
Recording from an external source
Settings for an external source (cont’d)
Before recording from an external source, see the instructions for the connection on page 40.
XP SP LP EP SLP SEP VCR mode SP SLP DVD mode
5
2
8
3
6
Setting a disc to protect
To prevent accidental recording,
editing or erasing of the titles,
you can protect them from Disc
menu.
1
Press SETUP.
Easy Setting Menu or Advanced
Setting Menu will appear.
2
Select “Disc” using
Cursor K / L, then press
ENTER.
Disc menu will appear.
3
Select “Disc Protect OFF
➔
ON” using Cursor K / L, then
press ENTER.
Option window will appear.
4
Select “Yes” using
Cursor K / L, then press
ENTER.
The disc will be protected.
Writing to Disc. 90%
No
Yes
Disc Protect OFF ON
Disc
Original
Format
Finalize
Disc Protect OFF ON
Playlist
1
4
2
Note
• The Disc Protect setting is
available only for a DVD-RW
disc recorded in VR mode.
• You can select only Disc Protect off
when a protected disc is inserted.
To cancel the disc protect:
• When you insert a protected
disc in this unit, “Disc Protect
ON
→ OFF” will appear.
To cancel the protection setting for
the disc, select “Disc Protect ON
→
OFF” at STEP 3, then select “Yes”.
No
Yes
Disc Protect ON OFF
3
1. Turn on the TV and the unit, and be sure to select the input
of the TV to which the unit is connected.
2. When you want to record to the disc:
Press OPEN/CLOSE EJECT A to open the disc tray, then
place the disc to record.
3. Press OPEN/CLOSE EJECT A to close the disc tray.
When you want to record to a videotape:
Insert the videotape with an erase-protection tab into the cassette
compartment.
4. Select the input of the unit which the external equipment is
connected (L2 or L 1).
• To use the input jacks on the back of this unit, select “L 1” position by
pressing 0, 0, 1 on the remote control or CH K / L.
• To use the input jacks on the front of this unit, select “L2” position by
pressing 0, 0, 2 on the remote control or CH K / L.
5. Select a recording speed by using REC MODE. Refer to
“Recording speed” on page 26 for DVD or page 95 for VCR.
6. Press REC/OTR to start recording.
7. Press Play on the external source to record from.
8. For disc: Press STOP C to stop recording.
press first. VCR
This operation may take a while to be recognized.
press first. DVD
4
1
Recor
ding
Disc Pla
yback
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the Setting men
u
VCR functions
Others
Español This operation may take a
while to be completed.
For videotape: Press STOP/EJECT C /A on the unit to stop recording.
This operation may take a while to be completed.
POWER
STOP/EJECT
REW F.FWD REC/OTR
PLAY DUBBING CHANNEL VCR DVD
OUTPUT SELECT
OPEN/CLOSE
STOP PLAY
REC/OTR
STOP/EJECT
REW F.FWD REC/OTR
PLAY PLAY
REC/OTR 6
8
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 41