Sharp DV-RW550U - Manual (Page 13)

Before you start
Recor
ding
Disc Pla
yback
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the Setting men
u
VCR functions
Others
Español
Functional overview (cont’d)
13
Front Panel Display Guide
Appears when DVD is in
the timer recording stand-
by mode.
Flashes when a program
cannot be performed for
some reasons.
:
Appears when a DVD-R
disc is on the disc tray.
:
Appears when a DVD-RW
disc is on the disc tray.
: Appears when the timer
recording is proceeding in
VCR.
Appears when VCR is in
the timer recording stand-
by mode.
Flashes when a program
cannot be performed for
some reasons.
:
Appears during VCR to
DVD duplication process.
:
Appears during DVD to
VCR duplication process.
Display message
3. Recording speed
Indicates the recording speed of
the disc or a videotape.
4. Title/Track and Chapter
mark
: Appears when indicating a
title/track number.
: Appears when indicating a
chapter number.
5. Displays the following
• Played-back time/remaining
time
• Current title/chapter/track
number
• Recording time
• Clock
• Channel number
• VCR tape counter
• Remaining time for a one-touch
timer recording
6. : Appears in the afternoon
with the clock display.
7. :
Appears when the pro-
gressive scan system is
activated.
1
6
3
5
2 4
7
Appears when data is
being recorded on a disc.
Appears when the disc
tray is opening.
Appears when the disc
tray is closing.
Appears when a disc is
loaded on the disc tray.
Note
• Time display during recording/playback
The recording time and playback time of this unit will display about 0. 1% faster than the real
recording/playback time.When broadcasting images, 29.9 frames are sent per second.This unit calculates
30 frames as one second. For this reason, time will display about 0.
1% faster. For example, if you record
for 1 hour, in reality there will be 1 hour of recorded material. However, the time display on this unit will
be "60 min. X 0.999 = 59.94 min. = 59 min. 56 sec.".
• During Timer Recording or timer standby mode on one component, , mark (during Timer
Recording), DVD,VCR indicator will disappear when the unit switches to the other component.
However, the function indicated by each mark is still working. (It does not mean the cancellation of Timer
Recording or timer standby mode.)
1. Current status of the unit
: Appears when a disc or a
videotape play is paused.
: Appears when playing back
a disc or a videotape.
: Appears when the timer
programming or OTR has
been set and is proceeding.
Flashes when all Timer
Recording have been finished.
: Appears during recording
process.
Flashes when a recording
pauses.
:
Appears during repeat play-
back (disc playback only).
: Appears when a videotape
is in the unit.
2. Disc type and Current sta-
tus of the unit
: Appears when an audio CD
is on the disc tray.
: Appears when a DVD disc
is on the disc tray.
Appears when the timer
recording is proceeding in
DVD.
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 13