Sharp DV-RW550U - Manual (Page 39)

39
Recording
Timer recording (cont’d)
PROG. 1
PROG. 2
Actual
recording
PROG. 2
When the recording time is entirely overlapped:
PROG.
1 will not be recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 2 PROG. 1
When the recording time is partially overlapped:
PROG.
1 will start after PROG. 2 is completed.
The first 30 seconds (at the longest) will be cut off
PROG. 1
PROG. 2
Actual
recording
PROG. 2
A programming set first has priority
When the starting time is same:
A program with a lower program number
(PROG.
1) has priority.
The first 30 seconds (at the longest) will be cut off
PROG. 1
PROG. 2
Actual
recording
PROG. 1 PROG. 2
PROG. 3
When some programmings have been made
around the ending time of the program
currently being recorded:
A program with a lower program number (PROG.
2)
has priority.
The first 30 seconds (at the longest) will be cut off
PROG. 1
Hints for Timer Recording
Thi s unit prioritizes recording as follows if the timer programmings are overlapped.
A Timer Recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
The priority of overlapped settings
Note for DVD recording
PROG. 1
PROG. 2
Actual
recording
The first 30 seconds (at
the longest) will be cut off.
PROG. 2 PROG. 1
When the ending time of the programming currently being recorded
and the starting time of the subsequent program are same:
If PROG.
1 is recorded on a DVD, the beginning of the PROG. 2 may be cut off.
The amount of time cut off differs depending on the recording media. For example, if both PROG. 1
and PROG. 2 are recorded on a DVD, the first 30 seconds (at the longest) of PROG. 2 will be cut off.
• When the recording time of two
programs are overlapped, or the
ending time of a program and the
starting time of another is same, the
first 30 seconds (at the longest) of
the subsequent program will be cut
off.
• If the cut-off portion reaches 1
minute or more, this program will
be displayed with error number E40
on the Timer Programming list.
Recor
ding
Disc Pla
yback
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the Setting men
u
VCR functions
Others
Español
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 39