Sharp DV-RW550U - Manual (Page 22)

22
Getting started
Setting the clock
VCR/DVD RECORDER
COMBINATION
Set the correct time before using
Timer Recording. If a Public
Broadcasting Service (PBS) station is
available in your area, follow the Auto
Clock Setting below. If not, follow the
Manual Clock Setting on pages 23.
Auto Clock Setting
Make sure:
• The antenna/CATV connections
are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station to set the
clock automatically.
1
Press SETUP.
Easy Setting Menu or Advanced
Setting Menu will appear.
If Advanced Setting Menu is dis-
played, proceed to STEP 3.
2
Select “Advanced Setting
Menu” using Cursor K / L,
then press ENTER.
Advanced Setting Menu will appear.
3
Select “Clock” using Cursor
K
/ L, then press ENTER.
Clock menu will appear.
Clock
Daylight Saving Time
Auto Clock Setting
ON
Auto
Clock Setting
DVD VCR
Advanced Setting Menu
Recording
Display
Select Video
Clock
Channel
Disc
Easy Setting Menu
Playback
Easy Setting Menu
Clock
Channel
DVD-RW Recording Format VR mode
Timer Programming
Auto Finalize
Progressive OFF
Advanced Setting Menu
OSD Language English
Disc
DVD VCR
4
Select “Auto Clock Setting”
using Cursor K / L, then
press ENTER.
Option window will appear.
The default is “Auto”.
5
• If you do not know the PBS
channel number in your area,
select “Auto” using Cursor
K
/ L, then press ENTER.
The setting will be activated.
• If you know the PBS channel
number in your area, select
“Manual” using Cursor
K
/ L, then press ENTER.
Enter the PBS channel
number using the Number
buttons or Cursor K / L,
then press ENTER.
The setting will be activated.
• If you want to set the clock manu-
ally and cancel the auto clock set-
ting function, select “OFF” using
Cursor K / L, then press ENTER.
The auto clock setting function
will be canceled.
6
Press SETUP to exit.
7
Press POWER to turn off the unit.
This unit will search for the clock time
only when the power is off. Leave it off for
several minutes to give this unit time to
set the clock on the front display panel.
Auto Clock Setting - Manual
CH 1
Set Channel No.
DVD VCR
Auto Clock Setting
OFF
Manual
Auto
DVD VCR
Note
• The clock may set itself auto-
matically after you connect the
antenna/CATV signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the front
panel display.
• If the current time is not dis-
played or the displayed clock
time is not correct, set the
clock manually.
2
3
4
5
1
6
5
7
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 22