Sharp DV-RW550U - Manual (Page 34)

34
Recording
One-touch Timer Recording
Note
• The remaining recording
time will appear on the dis-
play panel during an One-
touch Timer Recording.
Press DISPLAY to see it on
the TV screen.
• You cannot pause a One-
touch Timer Recording.
• Unlike a Timer Recording, you
can perform the following
operations during a One-
touch Timer Recording.
- Turning off the power.
- Using REC/OTR, STOP C.
• The unit will be turned off
automatically under the fol-
lowing conditions.
1) No space remained on the disc.
2) When a power failure occurs.
• If OTR is finished in DVD dur-
ing playback or REC mode in
VCR, the DVD will be in stop
mode and the VCR keeps the
current mode.
• When OTR is finished and the
power is turned off, the unit
will switch to the standby
mode automatically if a Timer
Recording has been pro-
grammed. Press T-SET to can-
cel the standby mode for using
the unit continuously.
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough recordable space for the
time you set.
After finishing the recording, the
recorder automatically goes into
standby.
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Select a recording speed
using REC MODE.
Refer to “Recording speed” on
page 26.
3
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-29.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from the setting menu.
The default is “VR mode”. Refer
to “Choosing the recording for-
mat of a blank disc” on page 28.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
4
Select a desired channel to
record using CH K / L or
the Number buttons.
5
Press REC/OTR, then press
REC/OTR repeatedly to
select a desired recording
time.
Recording time appears on the TV
screen (30 minutes to 8 hours).
Recording will start.
When the unit reaches the speci-
fied time, it will be turned off
automatically.
To change the recording time dur-
ing the One-touch Timer
Recording, press REC/OTR
repeatedly until the desired time
appear.
To cancel the One-touch Timer
Recording within the specified
time, press STOP C.
0:30
(Normal Recording)
8:00 7:30
1:00
I 0:30
press first. DVD
2
4
5
This operation may take a
while to be recognized.
This operation may take a
while to be completed.
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 34