Sharp DV-RW550U - Manual (Page 15)

VCR functions
Others
Español
Connections
Recor
ding
Disc Pla
yback
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the Setting men
u
15
Round Coaxial Cable
(supplied)
(Back of this unit)
IN OUT
(Back of TV)
Cable
Signal
Connection A
(Cable box or
Satellite box) ANTENNA IN
OUT
Connection to a cable box or satellite box
Select this connection when you want to view or record a scrambled channel.With this connection, channels
cannot be changed on this unit. You can view or record ONLY the channels you have selected on the cable
box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER .The “POWER” indicator on the front panel will appear. Then,
press CHANNEL to select channel 3 or 4 (the same channel as the output channel of the cable box or
satellite box).
• If noise appears on the TV screen, press VIDEO/TV on the remote control.
• If you use the channel 4, you will need to change this unit’s RF output to channel 4.
• Refer to “RF converter output” on page 101.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at STEP 1)).
3) At the cable box or satellite box, select the channel you want to view or record.
Round Coaxial Cable (supplied) Round Coaxial Cable
(Back of TV)
IN OUT
(Cable box or
Satellite box)
Cable
Signal
Connection B (Back of this unit)
ANTENNA
IN
OUT
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output chan-
nel.)
• Refer to “RF converter output” on page 101.
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER. The “POWER” indicator on the front panel will appear.Then,
select the channel you want to view or record.
• If noise appears on the TV screen, press VIDEO/TV on the remote control.
To play back a DVD disc or a videotape
Follow the STEPs
1) to 2) above, to playback a DVD disc or a videotape.
• Refer to “Playback” on pages 47-48, 95.
To view one channel while recording another
1) While you are recording on this unit, press VIDEO/TV.
2) At the cable box or satellite box, select the channel you want to view.
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 15