Sanyo PJ-Net Organizer Plus POA-LN02 - Manual (Page 64)

Chapter 4 Controlling the Monitor
Viewer auto setting all together
"Viewer auto display" can be set all together. Set "ON" the
multi control setting and select [3] auto display setting
from Viewer sub menu
(selected by "Multi-control" -
"Network Viewer" menu). Set the display time periods and
repeat times for the auto image display. When clicking
start button, the registered monitors start playing back
the auto image display in sequential.
For further information of the Auto display, see "Using the
network viewer function". ( p.92)
This is effective only if the multi control item of the registered
monitor sets to either "Control&Image" or "Image".
Multi-control