Sanyo PJ-Net Organizer Plus POA-LN02 - Manual (Page 63)

LD-NET ORGANIZER
OWNER'S MANUAL
Check & Change page in the light mode
Following functions in the "Check & Change" page are
not available in the light mode.
- Changing the control mode.
- Deleting the registered IP address
- Indicating the each status
- Indicating the each memo
Controlling all together
"Power & Status", "PC adjustment", "Control" and "Setting"
can be controlled all together. Set "ON" the multi control
setting and adjust controls of each menu. The setting
value is applied to the registered monitors sequentially .
This is effective only if the multi control item of the regis-
tered monitor sets to either "Control&Image" or "Control".
setting all together
"E-mail setting", "SNMP setting" and "Timer" can be set all
together. Set "ON" the multi control setting and items of
each menu. The setting value is applied to the registered
monitors sequentially.
This is effective only if the multi control item of the registered
monitor sets to either "Control&Image" or "Control".
(Check & Change page in the light mode)
This indicates that the
mode is "VisualControl".
This indicates that the
mode is "Control".
Connection status
Blinking: Connected
Gray: Disconnected
Multi-control