Sanyo PJ-Net Organizer Plus POA-LN02 - Manual (Page 16)

1
Chapter 2 Installation
The following are instructions for attaching this product to the monitor and connecting it
to the network. Please review the entire procedure to become familiar with it.
Function of the network unit ( p.17)
1
installation and network configuration ( p.18-25)
2
installation of the software ( p.26-28)
3
set up is complete
1
Mount this product onto the monitor.
2
Connect the LAN cable and join it to the network.
3
Configure the network of the network unit.
4
Set the Network PIN code.
Explains how to install the software Network Viewer & Capture 3 into your com-
puter.
Flow of installation
The preparation is completed to control the monitor connected to the network. At next
step, set up and control the monitor via the network by using the web browser installed
on your computer. Please see chapter 3 "Basic setting and operation". (
p.29)
Explains the name and functions of each part of the network unit.