John Deere 5310 S - Manual (Page 49)

Driving the Tractor
PY80265,05I0142 –19–11JUL06–1/1
Stopping Tractor
PY1205
–UN–11JUN02
PY1215
–UN–11JUN02
PY1469
–UN–28AUG03
A—Gear Shift Lever
B—Hand Throttle
C—Rockshaft Draft Control Lever
D—Rockshaft Position Control Lever
CAUTION: Always place the range shift lever in
neutral (N) and set brakes before dismounting.
Leaving transmission in gear with engine off
MAY NOT prevent tractor from moving.
1. Stop the tractor and place gear shift lever (A) in Park
position.
2. Apply brakes.
3. Lower all equipment to ground using rockshaft control
levers (C & D).,
4. Pull hand throttle (B) down to slow idle position. Allow
engine to idle for one to two minutes.
IMPORTANT: Cooling of certain engine parts is
provided by engine oil. Stopping a hot
engine suddenly could cause damage
to these parts by overheating or lack of
lubrication.
CAUTION: Remove the key from key switch to
prevent operation by untrained personnel.
5. Turn key switch to OFF position.
50-6
082206
PN=47