John Deere 5310 S - Manual (Page 140)

Service
PY80265,05I0275 –19–28JUN06–2/2
PY4921
–UN–12DEC05
PY4922
–UN–12DEC05 C—Collar
D—Bulb
3. Twist collar (C).
4. Remove bulb (D).
CAUTION: A halogen bulb is pressurized and
may shatter. Protect bulb against abrasions and
scratches.
To guard against personal injury, wear
protective eyeglasses and clothing when
handling bulb. Turn power off when installing
and before removing bulb. Dispose of bulb with
care.
Allow bulb to cool before removing.
Read and follow all bulb manufacturers
installation instructions.
5. Install bulb, collar, seal and connector in reverse order.
PY80265,05I0276 –19–12SEP05–1/1
Replace Tail Light and Warning Light Bulbs
PY4362
–UN–29DEC04
A— Cap Screws (2 used)
1. Remove screws (A ).
2. Remove lens.
3. Push and twist to release bulb from socket.
4. Reverse this procedure to reassemble light.
140-21
082206
PN=138