beautypg.com

Adjusting headlights, Replace headlight bulb – John Deere 5310 S User Manual

Page 139

background image

Service

PY80265,05I0273

–19–12SEP05–2/2

7. Locate small zone of bright light projected by each

lamp. Cover other lamps if necessary. Top of zone (E)
should be 130 mm (5 in.) below the tape. Left edge of
zone (F) should be 130 mm (5 in.) left of lamp location
marked (D).

8. To adjust headlights, see Adjusting Headlights in this

section.

PY80265,05I0274

–19–12SEP05–1/1

Adjusting Headlights

PY4104

–UN–12DEC05

A—Headlight Mounting Screw
B—Headlight Mounting Screw
C—Headlight Mounting Screw
D—Clips

1. Open the hood.

2. Turn screws (A—C) counterclockwise to lower beam or

clockwise to raise beam.

3. To adjust beam in toward center of tractor, turn screw

(A) counterclockwise and screws (B and C) clockwise
an equal number of turns on each screw.

4. To adjust beam out from center of tractor, turn screws

(B and C) counterclockwise and screw (A) clockwise
an equal number of turns on each screw.

NOTE: Clips (D) need not be removed for adjustment.

PY80265,05I0275

–19–28JUN06–1/2

Replace Headlight Bulb

PY5816

–UN–19JUN06

A—Headlight Connector
B—Dust Boot

1. Remove headlight connector (A).

2. Remove dust boot (B).

Continued on next page

140-20

082206

PN=137