beautypg.com

Symptom possible causes corrective action – JVC GR-DVX70 User Manual

Page 95

background image

EN

95

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

23. • The Picture Wipe or

Dissolve functions are in use.

• The Squeeze mode is selected

in the Mode Menu.

• A Fade-In or Fade-Out is in

progress.

• Dissolve during 5-second

mode recording is in use.

24. • When shooting in the dark, the

unit becomes highly sensitive to

light and the image takes on an

effect similar to Slow Shutter.

25. • The Picture Wipe or Dissolve

function is in use.

• Dissolve during 5-second

mode recording is in use.

26. • The Sepia or Monotone mode

is activated.

27. • This is a result of exceedingly

high contrast, and is not a

malfunction.

28. • This is not a malfunction.

29. • “DISPLAY” is set to “OFF” in

the Date/Time Menu.

• Interface Shooting is

performed.

30. • Images stored in the

MultiMediaCard are

protected.

31. • “ON SCREEN” is set to “OFF”

in the Date/Time Menu.

• You have made the indicators

disappear.

32. • In places subject to low

temperature, images become

dark due to the characteristics

of the LCD monitor. When

this happens, the displayed

colours differ from those that

are actually recorded. This is

not a defect of the camcorder.

• When the LCD monitor’s

fluorescent light reaches the

end of its service life, images on

the LCD monitor become dark.

Consult your nearest JVC dealer.

23. • Make sure the Squeeze mode

is set to “OFF” (

pg. 34 –

39).

• Do not try to use the Video

Echo mode during a Fade-In or

Fade-Out or when Dissolve is

activated during 5-second

mode recording (

pg. 44,

45).

24. • If you want the lighting to

look more natural, set GAIN

UP to “AGC” or “OFF” in the

Mode Menu (

pg. 34 – 39).

25. • Do not try to use the Classic

Film or Strobe mode during a

scene transition (

pg. 44,

45).

26. • Turn off Sepia or Monotone

before setting White Balance

(

pg. 44, 45).

27.

————

28.

————

29. • Set “DISPLAY” to “ON” in the

Date/Time Menu (

pg. 26).

• During Interface Shooting, the

date/time does not appear

(

pg. 21).

• Set “INDICATION” to “ON”

in the Date/Time Menu

(

pg. 27).

30. • Remove protection from the

images stored in the

MultiMediaCard and delete

them (

pg. 62, 64).

31. • Set “ON SCREEN” to “ON” in

the Date/Time Menu

(

pg. 26).

• Set “INDICATION” to “ON”

in the Date/Time Menu

(

pg. 27).

32. • Adjust the brightness and

angle of the LCD monitor

(

pg. 21).

23. The Video Echo mode does

not work.

24. Even when Slow Shutter is

not selected, the image looks

like it is activated.

25. There is no strobe when the

Classic Film or Strobe mode

is activated.

26. White Balance cannot be

activated.

27. When shooting a subject

illuminated by bright light,

vertical lines appear.

28. When the screen is under

direct sunlight during

shooting, the screen becomes

red or black for an instant.

29. During recording, the date/

time does not appear.

30. Images stored in the

MultiMediaCard cannot be

deleted.

31. The indicators and messages

do not appear.

32. Images on the LCD monitor

appear dark or whitish.

CONTINUED ON NEXT PAGE