JVC GR-DVX70 - Manual (Page 76)

76
EN
PLA
Y/P
C
OF
F
CA
ME
RA
5S DSC DSC
PL
AY
TO COPY TO TAPE
PUSH “SNAPSHOT
TAPE
SP 444
TAPE
SP
Power Switch
Rewind (2)
Button Fast-Forward
(3) Button
PHOTO
(SNAPSHOT)
Button
Power lamp
Lock Button
Dubbing Images Stored In A
MultiMediaCard To A Tape
Images can be dubbed from a MultiMediaCard to a tape.
1 LOAD CASSETTE AND
MULTIMEDIACARD
2
SELECT OPERATION MODE
Set the Power Switch to “ ” while pressing
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
3 SELECT IMAGE TO BE DUBBED
Perform Index Playback (
੬
pg. 59), Auto Playback
(
੬
pg. 56) or press 2 or 3 to select the image
you wish.
4
START DUBBING
Press PHOTO (SNAPSHOT). The message “TO
COPY TO TAPE PUSH SNAPSHOT” is displayed for
approx. 5 seconds. While the message is displayed,
press PHOTO (SNAPSHOT) again and the selected
image is recorded on the tape for approx. 5 seconds.
•The “SP” or “LP”, TAPE and tape running indicators
disappear when dubbing is complete.
NOTE:
If PHOTO (SNAPSHOT) is pressed in step 4 when the
tape’s erase protection switch is set to “SAVE”, the message
“COPYING FAILED” is displayed.
Display
DUBBING (cont.)