beautypg.com

Recording, Exposure control, Advanced features for video and d.s.c. (cont.) – JVC GR-DVX70 User Manual

Page 48

background image

48

EN

A

M

PL

AY

/PC

OFF CAMER

A

5S

DS

C

DS

CPLA

Y

FOCUS
EXPOSURE

MANUAL

AUTO

AUTO

W. BALANCE

4

EXP.

0

EXP.

6

EXP.

6

Exposure Control

This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.

1

SELECT OPERATION MODE

Set the Operation Switch to “

”. Then, set the Power

Switch to “

”, “5S” or “

” while pressing

down the Lock Button. Pull out the viewfinder fully or
open the LCD monitor fully.

2

ACCESS RECORDING MENU

Press MENU/SET. The Recording Menu appears.

3

ACCESS “EXPOSURE”

Rotate MENU/SET to move the highlight bar to
“EXPOSURE”, then press it.

4

ACCESS EXPOSURE CONTROL

Rotate MENU/SET to display “MANUAL”, then press it.
The Recording Menu disappears. “EXP.” and the highlight
bar on the exposure control indicator are displayed.

5

ADJUST EXPOSURE

To brighten the image . . .

..... rotate MENU/SET upward. The exposure control

indicator increases (maximum +6).
Go to step 6.

To darken the image . . .

..... rotate MENU/SET downward. The exposure control

indicator decreases (maximum –6).
Go to step 6.

6

END ADJUSTMENT OF EXPOSURE

Press MENU/SET. Exposure adjustment is complete. The
indication “EXP.” changes to “MANUAL” and the highlight
bar on the exposure control indicator goes out.

• If you want to reset the exposure, repeat step 2.

To Return To Automatic Exposure Control . . .

..... rotate MENU/SET to display “AUTO” then press it in step

4. The exposure control indicator disappears. Or set the
Operation Switch to “

”.

NOTES:

● After the Power Switch is set to “OFF”, Exposure Control is

reset to “AUTO”.

● Manual exposure adjustment is recommended in the

following situations:

When shooting using reverse lighting or when the
background is too bright.

When shooting on a reflective natural background such
as at the beach or when skiing.

When the background is overly dark or the subject light.

To Brighten The Subject Quickly . . .

..... press BACK LIGHT.

is displayed and the subject is

brightened. If pressed again,

disappears and the

brightness returns to the previous level. The value shown by
the exposure control indicator plus 2 is the back light
compensation level. The maximum compensation level is
+6. Back light compensation is also available when the
Operation Switch is set to “

”.

Recording Menu

Exposure control indicator

Display

Power Switch

To brighten the image

To darken the image

MENU/SET Dial

Lock Button

Power lamp

Operation Switch

BACK LIGHT
Button

RECORDING

Advanced Features For Video And D.S.C. (cont.)