Using the remote control unit, Cont.) for more accurate editing, Diagnosing vcr’s against camcorder timing – JVC GR-DVX70 User Manual

Page 88: Prepare for r.a.edit, Choose a scene, Play back dubbed scene

– – – – : – – ~

TIME CODE

I N

OUT

MODE

– – : – –
0 0 : 0 0

TOTAL

PLAY/P

5SD

DSC

USING THE REMOTE CONTROL UNIT

(cont.)

For More Accurate Editing

Some VCRs make the transition from Record-Standby to
Record mode faster than others. Even if you begin editing
for the camcorder and the VCR at exactly the same time,
you may lose scenes you wanted, or find that you have
recorded scenes you did not want. For a cleanly edited
tape, confirm and adjust the timing of the camcorder
against your VCR.

DIAGNOSING VCR’S AGAINST
CAMCORDER TIMING

PREPARE FOR R.A.EDIT

Play back the tape in the camcorder, then point the
remote control at the camcorder’s remote sensor and
press R.A.EDIT ON/OFF.

•“Random Assemble Editing Menu” appears.

CHOOSE A SCENE

Perform Random Assemble Editing on Programme 1
only. In order to check VCR and camcorder timing,
select the beginning of a scene transition as your Edit-
In point.

PLAY BACK DUBBED SCENE

•If any images from the scene prior to the transition

you chose for your Edit-In point were recorded, that
means your VCR moves quickly from Record-Pause
to Record mode.

•If the scene you tried to dub starts in progress, the

VCR is slow to start recording.

Random Assemble
Editing Menu

R.A.EDIT
ON/OFF

Programme 1

Power Switch

VCR

(Recording deck)

Remote sensor

RM-V713U
(provided)