JVC GR-DVX70 - Manual (Page 14)

14
EN
GETTING STARTED (cont.)
Loading A MultiMediaCard
1 CONFIRM POWER-OFF STATUS
Make sure the camcorder’s power is off .
2
OPEN THE CARD COVER
3 INSERT THE MULTIMEDIACARD
Insert the MultiMediaCard terminal end first with the
label facing up (see the illustration on the left).
•Do not touch the terminal.
4
CLOSE THE CARD COVER
•If the card is not installed properly, the card cover
cannot be closed.
NOTES:
● Be sure to use only MultiMediaCards marked
“ ”.
● Some brands of MultiMediaCards are not compatible with
this camcorder. Before purchasing a MultiMediaCard,
consult its manufacturer or dealer.
Unloading A MultiMediaCard
The MultiMediaCard retains images in its memory even
after it has been removed from the camcorder.
1
CONFIRM POWER-OFF STATUS
Make sure the camcorder’s power is off.
2
OPEN THE CARD COVER
3 REMOVE THE MULTIMEDIACARD
Press EJECT. The MultiMediaCard is disengaged from
the camcorder.
4 CLOSE THE CARD COVER
MultiMediaCard
Terminal
EJECT
Card Cover
ATTENTION:
Do not insert/remove the MultiMediaCard while the
camcorder is turned on, as this may cause the
MultiMediaCard to be corrupted or cause the
camcorder to become unable to recognize whether or
not the card is installed.