JVC GR-DVX70 User Manual
Page 77
EN
77
SP
4
PLAY/P
C
OF
F
CA
ME
RA
5SD
SC
DSC
PL
AY
SNAPSHOT MODE Button
Dubbing Images Recorded On A Tape To A
MultiMediaCard
Images can be dubbed from a tape to a MultiMediaCard.
1
LOAD CASSETTE AND
MULTIMEDIACARD
2
SELECT OPERATION MODE
Set the Power Switch to “
” while pressing
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
3
SELECT IMAGE TO BE DUBBED
Press 4/6 to start playback. At the moment you find
the image you wish to dub, press it again to engage
Still Playback.
4
SELECT SNAPSHOT MODE
Press SNAPSHOT MODE to select the Snapshot
mode to use for dubbing the image to the
MultiMediaCard.
5
START COPYING
Press PHOTO (SNAPSHOT). The image is stored in
the MultiMediaCard.
•“
” blinks during dubbing.
NOTES:
● If PHOTO (SNAPSHOT) is pressed in step 5 when a
MultiMediaCard is not loaded, the message “COPYING
FAILED” is displayed.
● If an image recorded on the tape using the WIDE mode
(
੬
pg. 37) is dubbed to a MultiMediaCard, the WIDE
mode identifying signal is not dubbed with it.
Play/Pause (4/6)
Button
Display
Power Switch
PHOTO
(SNAPSHOT)
Button
Power lamp
Lock Button