JVC GR-DVX70 - Manual (Page 69)

EN
69
A M
0 0 1 0 0 2 0 0 3
0 0 5 0 0 4
E X I T I N D E X
0 0 6
PLA
Y/P
C
OF
F
CA
ME
RA
5S DSC DSC
PL
AY
Superimposing A Title/Frame
A title/frame can be superimposed over the playback
picture (image).
1 START PLAYBACK
Play back a tape or images in a MultiMediaCard.
2
SUPERIMPOSE TITLE/FRAME
Press TITLE (/Frame). A title/frame is superimposed
over the playback picture (image).
3 ACCESS TITLE/FRAME INDEX SCREEN
Press MULTI SCREEN. The Title/Frame Index Screen
appears.
4
SELECT DESIRED TITLE/FRAME
Rotate MENU/SET to move the green frame to the
desired title/frame and press it. The selected title/
frame is superimposed over the playback picture
(image).
5
MAKE TITLE/FRAME DISAPPEAR
Press TITLE (/Frame). The selected title/frame
disappears.
NOTES:
● A title/frame created on a PC can be transferred to a
MultiMediaCard using the provided software. Transferred
titles/frames are displayed from title/frame index number
013, and they can be used together with the titles/frames in
the camcorder’s memory. For details on creating/transferring
titles/frames, refer to the software instructions.
● If Snapshot recording/playback is performed with a title/
frame, the images will be recorded/played back in the FULL
mode regardless of the selected Snapshot mode.
● Depending on the images you record or play back, the title/
frame outline may become grainy or vague.
● During title/frame display, it is not possible to change the
Snapshot mode.
To Record An Image With A Title/Frame . . .
.... You can also record an image with a title/frame by
performing the following procedure.
1. Set the Operation Switch to “ ” or “ ”. Then, set the
Power Switch to “ ”, “5S” or “ ” while
pressing down the Lock Button.
2. Press TITLE (/Frame) to superimpose a title/frame on an
image.
3. Press MULTI SCREEN to display the Title/Frame Index
Screen.
4. Rotate MENU/SET to move the green frame to the
desired title/frame and press it. The selected title/frame
is superimposed over the image.
5. Press START/STOP or PHOTO (SNAPSHOT) to start
recording. The image is recorded with the selected title/
frame.
6. Press TITLE (/Frame) to make the title/frame disappear.
Display
Power Switch
Title/Frame Index
Screen
MENU/SET Dial
MULTI SCREEN
Button
START/STOP
Button
Operation Switch
PHOTO
(SNAPSHOT)
Button
Lock Button
Power lamp
TITLE (/Frame)
Button
NOTES:
● During recording, it is not possible to change the title/frame, as the Title/Frame Index Screen does not appear if
MULTI SCREEN is pressed.
● The titles/frames displayed in the Title/Frame Index Screen may be jittery.