Recording, Programme ae with special effects, Advanced features for video and d.s.c. (cont.) – JVC GR-DVX70 User Manual
Page 44: Important
44
EN
A
M
PL
AY
/PC
OFF CAMER
A
5S
DS
C
DS
CPLA
Y
PAUSE
4
P. AE / EFFECT
SLOW 4X
1
SLOW 10X
2
B/W
STROBE
TWILIGHT
SEPIA
MONOTONE
CLASSIC FILM
SEL.
OFF
4
FLASH ADJ
P. AE
/ EFFECT
END
TO MODE MENU
0
Programme AE With Special Effects
IMPORTANT:
If certain Fades or Wipes (
੬
pg. 43) are activated, some
modes of Programme AE with special effects cannot be
used. If you select a mode that is unusable in the current
situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/
EFFECT Menu.
1
SELECT OPERATION MODE
Set the Operation Switch to “
”. Then set the Power
Switch to “
” or “
” while pressing down
the Lock Button. Pull out the viewfinder fully or open
the LCD monitor fully.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS “P.AE/EFFECT” SELECT MENU
Rotate MENU/SET to move the highlight bar to “P.AE/
EFFECT”, then press it.
4
SELECT MODE
Move the highlight bar to the desired mode by
rotating MENU/SET, then press it.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The symbol of the selected mode
appears.
5
DISABLE MODE
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to “OFF”
by rotating MENU/SET. Then press it.
NOTES:
● Programme AE with special effects can be changed
during recording or during Record-Standby.
● The following modes are available only when the Power
Switch is set to “
”: “CLASSIC FILM”, “STROBE”
and “VIDEO ECHO”.
Display
Recording Menu
P.AE/EFFECT Menu
The indicator for the selected mode appears, and the
selected mode is engaged.
MENU/SET Dial
Power Switch
Lock Button
Power lamp
Operation Switch
RECORDING
Advanced Features For Video And D.S.C. (cont.)