Dubbing, Cont.) – JVC GR-DVX70 User Manual

Page 78

PLA

Y/P

5S DSC

DSC

< 50 cm

MENU/SET Dial

Lock Button

Power lamp

Copying Images Using Infrared
Communication [IrTran-P]

Images stored in a MultiMediaCard can be copied
between this camcorder and another piece of equipment
that supports IrDA (IrTran-P) infrared communication,
regardless of its manufacturer.
The following procedure is described using two
GR-DVX7 camcorders as an example. For use of other
video units, refer to their respective instructions.

LOAD MULTIMEDIACARDS

[For both receiving and transmitting camcorders]
Insert MultiMediaCards into both receiving and
transmitting camcorders.

SELECT OPERATION MODE

[For both receiving and transmitting camcorders]
Set the Power Switch to “

” while pressing

down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.

ACCESS PLAYBACK MENU

[For both receiving and transmitting camcorders]
Press MENU/SET. The Playback Menu appears.

SELECT FUNCTION

[For both receiving and transmitting camcorders]
Rotate MENU/SET to move the highlight bar to
“IrTran-P” and press it. The selected parameter blinks.

SELECT IrTran-P MODE

[For transmitting camcorder]
Rotate MENU/SET until “TRANSMIT” appears and
press it. The normal playback screen appears.

SELECT IMAGE TO BE COPIED

[For transmitting camcorder]
Perform Index Playback (

੬

pg. 59), Auto Playback

(

੬

pg. 56) or press 2 or 3 to select the desired

image.

Power Switch

Rewind (2)
Button

Fast-Forward
(3) Button

DUBBING

(cont.)

Infrared transmitter/receiver