JVC RX-D412BUJ - Manual (Page 51)

Operating other
manufacturers’
products
By changing the transmittable signals, you can use the
supplied remote control to operate other manufacturers’
products.
• Refer also to the manuals supplied with the other products.
• To operate those components with the remote control, first
you need to set the manufacturer codes each for the TV,
VCR, CATV converter, DBS tuner, and DVD player.
• After replacing the batteries of the remote control, set the
manufacturer codes again.
• All the functions may not be assigned to the buttons for
some equipment.
To change the transmittable signals for operating a TV
1
Press and hold TV/SIRIUS .
• Keep the button pressed until step 3 is finished.
2
Press TV.
3
Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See “Manufacturer codes for TV” on the right.
4
Release TV/SIRIUS .
Now, you can perform the following operations on the TV:
TV VOL +/–: Adjust the volume on the TV.
TV/VIDEO: Change the input mode (either
video input or TV tuner) on the TV.
After pressing TV, you can perform the following
operations on the TV:
TV/SIRIUS : Turn on or off the TV.
CHANNEL +/–: Change the channel numbers.
1 – 9, 0, 100+ ( h10): Select the channel numbers.
See the manual supplied with the TV for details.
5
Try to operate your TV by pressing TV/
SIRIUS .
Your TV turns on or off when you have entered the correct
code.
If more than one code is listed for your brand of TV, try
each one until the correct one is entered.
Manufacturer codes for TV:
Manufacturer Codes
JVC 01
Akai 02
Bell+Howell 03
Centurion 04
Coronad 05
Daewoo 06, 07, 08
Emerson 09, 10, 11, 12, 13
Fisher 14
GE•Pana 15, 16
GE•RCA 17
Gold Star 18, 19
Hitachi 20, 21
KTV 22, 23
Magnavox 24
Marantz 25
Mitsubishi 25
Panasonic 26, 27
Philips 24
Pioneer 28
Proscan 29
Quasar 30
Radioshack 31
RCA 02, 17, 32, 33, 34, 35
Samsung 36, 37, 45, 46, 47, 48
Sanyo 14
Sears 38
Sharp 39, 49, 50
Sony 40
Symphonic 41, 42
Toshiba 38
Zenith 43, 44
Initial setting: 01
Manufacturer codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
49
45-55_Others.indd 49 45-55_Others.indd 49 06.6.27 2:45:04 PM 06.6.27 2:45:04 PM