JVC RX-D412BUJ - Manual (Page 12)

7 Audio/video connection
In addition to the HDMI terminals, this receiver is equipped
with three video terminals—composite video, S-video, and
component video terminals, and two audio jacks—analog
discrete 5.1 channel audio input jacks (DVD MULTI IN) and
stereo audio jacks.
• If your video components have S-video (Y/C-separation)
and/or component video (Y, P B , P R ) jacks, connect them
using an S-video cable (not supplied) or component video
cable (not supplied). By using these terminals, you can get a
better picture quality in the order:
Component > S-video > Composite
IMPORTANT:
The video signals from one type of these input jacks are
transmitted only through the video output jacks of the
same type. Therefore, if a recording video component and
a playing video component are connected to the receiver
through the video terminals of different type, you cannot
record the picture. In addition, if the TV and a playing video
component are connected to the receiver through the video
terminals of different type, you cannot view the playback
picture on the TV.*
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver,
the sound output through this receiver may be distorted.
If your video components have AV COMPU LINK terminals
See also page 45 for detailed information about the
connection and the AV COMPU LINK remote control system.
* When connecting the TV to the receiver through the HDMI
MONITOR OUT terminal and selecting “HDMI” for the video
output setting, you can view the playback picture on the TV.
Do not connect the AC power cord until all other connections have been made.
Connecting a DVD recorder or DVD player with its stereo output jacks:
Turn off all components before making connections.
• When you connect the components, refer also to their manuals.
Component video cable (not supplied)
Stereo audio cable
(not supplied)
Composite video cable
(not supplied)
S-video cable (not supplied)
Composite video cable (not supplied)
DVD recorder or DVD player
Green
Blue
Red
White
Red
Red
White
: signal flow
NOTES
• Select the audio and video input setting according to the
connection method. See page 21 for details.
• You can enjoy digital sound if using a digital coaxial or optical
cable. When shipped from the factory, the digital coaxial terminal—
DIGITAL IN 1(DVR/DVD) on the rear of the receiver is set for a DVD
recorder and DVD player. For details of digital audio connection, see
page 14.
Å To component video output
• Connect Y, P B , and P R correctly.
ı To left/right audio channel output
Ç Only for DVD recorder: To left/right audio channel input
Î To composite video output
‰ To S-video output
Ï Only for DVD recorder: To S-video input
Ì Only for DVD recorder: To composite video input
10
06-15_Connection.indd 10 06-15_Connection.indd 10 06.6.27 2:35:45 PM 06.6.27 2:35:45 PM