7 adjusting the center tone—center tone – JVC RX-D412BUJ User Manual

Page 40

7 Adjusting the center channel localization for

Pro Logic IIx Music and Pro Logic II Music—
CENTER WIDTH

This setting is available when Pro Logic IIx Music or Pro Logic
II Music is activated for the analog or digital 2-channel sound
signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see pages
43 and 44.
• If “CENTER SPK” is set to “NO” (see page 30), this item is not

adjustable.

• Once you have made an adjustment, it is memorized until

you change the setting.

Adjustable range: OFF and 1 to 7 (in 1 step intervals)

Initial setting:

As the number increases, the center channel sound moves
toward the left and right speakers.
Normally, select “3.”

7 Adjusting the sound localization position

for Pro Logic IIx Music and Pro Logic II Music
—DIMENSION

This setting is available when Pro Logic IIx Music or Pro Logic
II Music is activated for the analog or digital 2-channel sound
signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see pages
43 and 44.
• Once you have made an adjustment, it is memorized until

you change the setting.

Adjustable range: 1 to 7 (in 1 step intervals)

Initial setting:

As the number increases, the sound localization moves
towards forward from backward.
Normally, select “4.”

7 Adjusting the sound localization of the center

channel—CENTER GAIN

This setting is available only when Neo:6 Music is in use.
• If “CENTER SPK” is set to “NO” (see page 30), this item is not

adjustable.

• Once you have made an adjustment, it is memorized until

you change the setting.

Adjustable range: 0 to 1.0 (in 0.1 step intervals)

Initial setting:

0.3

As the number increases, the center channel will be localized
clearly.
Normally, select “0.3.”

7 Adjusting the center tone—CENTER TONE

This setting is available when one of the Surround/DSP modes
is in use. To activate Surround/DSP mode, see pages 43 and
44.
• If “CENTER SPK” is set to “NO” (see page 30), this item is not

adjustable.

• This setting is common to all Surround modes, and is

memorized separately for DSP modes.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting:

As the number increases, the dialogue becomes stronger.
Normally, select “3.”
• When the center tone is set to other than “3,” the C.TONE

indicator lights up on the display.

7 Aligning the vertical localization of the

center channel for Surround/DSP modes—
CENTER ALIGN

This setting is available when one of the Surround/DSP modes
(except Pro Logic IIx Music, Pro Logic II Music, Neo:6 Music,
and All Channel Stereo) is in use. To activate Surround/DSP
mode, see pages 43 and 44.
• If “CENTER SPK” is set to “NO” (see page 30), this item is not

adjustable.

• Once you have made an adjustment, it is memorized for

each Surround/DSP mode.

C ALIGN ON

Select this when you cannot feel as if the
actors or singers are speaking or singing on
the screen.

C ALIGN OFF

Center alignment is turned off.

Initial setting:

OFF

35-38_SoundAdj.indd 38

06.6.27 2:43:14 PM