Operating other jvc products, 7 tv, 7 vcr 7 sirius satellite radio – JVC RX-D412BUJ User Manual

Page 49

Operating other JVC
products

You can use the supplied remote control to operate not
only this receiver but also other JVC products.
• Refer also to the manuals supplied with the other products.

– Some JVC VCRs can accept two types of the control

signals—remote codes “A” and “B.” This remote control
can operate a VCR whose remote control code is set to “A.”

– Some JVC DVD recorders can accept four types of the

control signals. Select an appropriate code for your DVD
recorder (see page 48).

• To operate other products, aim the remote control directly

at the remote sensor on the target product.

7 TV

You can always perform the following operations:

TV VOL +/–:

Adjust the volume on the TV.

TV/VIDEO:

Change the input mode (either video
input or TV tuner) on the TV.

After pressing TV, you can perform the following operations
on the TV:

TV/SIRIUS

Turn on or off the TV.

CHANNEL +/–:

Change the channel numbers.

1 – 9, 0, 100+ (

h10): Select the channel numbers.

RETURN (10):

Switch between the previous channel
and the current channel.

7 VCR

7 SIRIUS Satellite Radio

You can always perform the following operation:

VCR

Turn on or off the VCR.

After pressing VCR, you can perform the following operations
on the VCR:

CHANNEL +/–:

Change the channel numbers on the VCR.

1 – 9, 0:

Select the channel numbers on the VCR.

Start playback.

Stop playback.

Pause playback. To release it, press

¡:

Fast-forward a tape.

Rewind a tape.

After pressing SIRIUS, you can perform the following
operations on the SIRIUS Satellite Radio:

TV/SIRIUS

Turn on or off the SIRIUS Satellite Radio.

CHANNEL +/–:

Change the channel numbers on the
SIRIUS Satellite Radio.

SELECT:

Select a highlighted item on the display
of the SIRIUS Satellite Radio.

CAT

9/( CAT:

Change the category of the program.

MENU:

Enter and exit from the Menu Option
screen of the SIRIUS Satellite Radio.

DISPLAY:

Change the text size on the display of the
SIRIUS Satellite Radio.

1 – 9, 0, BAND:

Store or tune in to the preset channel.

MEMORY:

Store information on the display of the
SIRIUS Satellite Radio.

DIRECT:

Enable access to channels of the SIRIUS
Satellite Radio directly by numeric
buttons.

PREV:

Return to the previous channel.

NOTE

The remote control may not operate a SIRIUS Satellite Radio properly
if it is not KT-SR2000 (JVC SIRIUS Satellite Radio).

45-55_Others.indd 47

06.6.27 2:45:03 PM