JVC RX-D412BUJ User Manual

Page 14

Do not connect the AC power cord until all other connections have been made.

Turn off all components before making connections.
• When you connect the components, refer also to their manuals.

Connecting a VCR:

Component video cable (not supplied)

Stereo audio cable
(not supplied)

Composite video cable
(not supplied)

S-video cable (not supplied)

Composite video cable (not supplied)

VCR

Green

Blue

Red

White

Red

White

: signal flow

NOTES

• Select the audio and video input settings according to the connection method. See page 21 for

details.

• When connecting a VCR to the COMPONENT VIDEO jacks, select “VCR” for the COMPONENT

select setting (see page 34); otherwise, the following occurs:
– You cannot view the playback picture on the TV.
– The AV COMPU LINK remote control system (see pages 45 and 46) cannot operate properly.

• You can enjoy digital audio if using a digital coaxial or optical cable. When shipped from the

factory, the digital optical terminal—DIGITAL IN 3(VCR) on the rear of the receiver is set for a
VCR. For details of the digital audio connection, see page 14.

Å To component video output

• Connect Y, P

, and P

correctly.

ı To left/right audio channel output

Ç To left/right audio channel input

Î To composite video output

‰ To S-video output

Ï To S-video input

Ì To composite video input

Connecting a SIRIUS Satellite Radio

NOTES

• To connect KT-SR2000 (JVC SIRIUS Satellite Radio) to this receiver, it is required to separately purchase KS-K6013 Home Docking Kit.
• You cannot use a digital audio cable (coaxial or optical) to connect a SIRIUS Satellite Radio to this receiver.
• After connecting a SIRIUS Satellite Radio to the TV/SIRIUS IN jacks, change the source name to “SIRIUS.” See page 20 for details.

Stereo audio cable (not supplied)

SIRIUS Satellite Radio

White

Red

06-15_Connection.indd 12

06.7.6 4:55:39 PM