7 selecting the surround/dsp modes, Select and play any source, On the front panel – JVC RX-D412BUJ User Manual
Page 46: Press surround
7 Selecting the Surround/DSP modes
From the remote control:
1
Select and play any source.
• Surround/DSP modes are not available when multi-
channel PCM (see page 41) signals recorded in DVD-
Audio are coming in. See page 11 for details.
• Make sure you have selected the audio input setting
(analog or digital) correctly (see page 21).
2
Press SURROUND repeatedly to select
the Surround/DSP mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
multi-channel software:
*
1
“AUTO SURROUND” is the initial setting.
*
2
Available Surround modes vary depending on the
speaker settings and the incoming signals. For details,
see page 42.
*
3
If an incoming signal is a multi-channel (more than 2
channel) digital signal, “MONO FILM” is not available.
*
4
If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is
not available.
To cancel Surround/DSP modes
Press SURROUND repeatedly so that “SURROUND OFF”
appears on the display.
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
2
again.
1
Select and play any source.
• Surround/DSP modes are not available when multi-
channel PCM (see page 41) signals recorded in DVD-
Audio are coming. See page 11 for details.
• Make sure you have selected the audio input setting
(analog or digital) correctly (see page 21).
2
Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3
Turn MULTI JOG to select the Surround/
DSP mode you want.
Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital
multi-channel software:
*
1
“AUTO SURROUND” is the initial setting.
*
2
Available Surround modes vary depending on the
speaker settings and the incoming signals. For details,
see page 42.
*
3
If an incoming signal is a multi-channel (more than 2
channels) digital signal, “MONO FILM” is not available.
*
4
If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is
not available.
To cancel Surround/DSP modes
Turn MULTI JOG so that “SURROUND OFF” appears on the
display.
1, 3
2
AUTO SURROUND*
1
Ô Surround modes*
2
Ô HALL1
Ô HALL2 Ô LIVE CLUB Ô DANCE CLUB Ô
PAVILION
Ô THEATER1 Ô THEATER2 Ô MONO
FILM*
3
Ô ALL CH STEREO*
4
Ô SURROUND OFF Ô
(Back to the beginning)
AUTO SURROUND*
1
= Surround modes*
2
= HALL1
= HALL2 = LIVE CLUB = DANCE CLUB = PAVILION
= THEATER1 = THEATER2 = MONO FILM*
3
=
ALL CH STEREO*
4
= SURROUND OFF =
(Back to the beginning)
2
1
44
39-44_Surround.indd 44
39-44_Surround.indd 44
06.6.27 2:43:57 PM
06.6.27 2:43:57 PM