Reinforcing the bass—bass boost, Attenuating the input signal— input att, 7 adjusting the effect level for dsp modes— effect – JVC RX-D412BUJ User Manual

Page 39

Reinforcing the bass—BASS BOOST

You can boost the bass level—Bass Boost.
• Once you have made an adjustment, it is memorized for

each source.

• You cannot adjust directly from the remote control.

B BOOST ON

Select to boost the bass level.
The B.BOOST indicator lights up on the
display.

B BOOST OFF

Select to deactivate the Bass Boost.

Initial setting:

OFF

NOTE

This function affects only the sound coming out through the front
speakers.

Attenuating the input signal—
INPUT ATT

When the input level of analog source is too high, the sound
will be distorted. If this happens, you need to attenuate the
input signal level to prevent the sound distortion.
• Once you have made an adjustment, it is memorized for

each source.

• You cannot adjust directly from the remote control.

ATT ON

Select to attenuate the input signal level.
The INPUT ATT indicator lights up on the
display.

ATT NORMAL

Select to deactivate attenuation.

Initial setting:

NORMAL

Adjusting the sound parameters for
the Surround/DSP modes

You can adjust the Surround/DSP sound parameters to your
preference.
• For details about the Surround/DSP modes, see pages 39 to

44.

• You cannot adjust these items directly from the remote

control.

7 Adjusting the effect level for DSP modes—

EFFECT

This setting is available only when one of the DSP modes
(except All Channel Stereo) is in use. To activate DSP mode,
see pages 43 and 44.
• Once you have made an adjustment, it is memorized for

each DSP mode.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting:

As the number increases, the effect becomes stronger.
Normally, select “3.”

7 Adjusting the virtual room size for DSP

modes—ROOM SIZE

This setting is available only when one of the DSP modes
(except All Channel Stereo) is in use. To activate DSP mode,
see pages 43 and 44.
• If “SURROUND SPK” is set to “NO” (see page 30), this item is

not adjustable.

• Once you have made an adjustment, it is memorized for

each DSP mode.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting:

As the number increases, the interval between reflections
increases so that you will feel as if you were in a larger room.
Normally, select “3.”

7 Adjusting the liveness effect for DSP

modes—LIVENESS

not adjustable.

• Once you have made an adjustment, it is memorized for

each DSP mode.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting:

As the number increases, the attenuation level of reflections
over time decreases so that acoustics change from “Dead” to
“Live.”
Normally, select “3.”

7 Adjusting the panorama control for Pro Logic

IIx Music and Pro Logic II Music—PANORAMA

This setting is available when Pro Logic IIx Music or Pro Logic
II Music is activated for the analog or digital 2-channel sound
signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see pages
43 and 44.
• Once you have made an adjustment, it is memorized until

you change the setting.

PANORAMA ON

Select to add “wraparound” sound effect
with side-wall image.

PANORAMA OFF

Select to listen to originally recorded
sound.

Initial setting:

OFF

35-38_SoundAdj.indd 37

06.6.27 2:43:13 PM