JVC RX-D412BUJ - Manual (Page 50)

7 DVD recorder or DVD player
After setting the mode selector correctly, you can perform
the following operations on the DVD recorder or DVD player.
See the manual supplied with the DVD recorder or DVD
player for details.
To change the remote control code for DVD recorder
Some JVC DVD recorders can accept four types of control
signals. You can assign one of the four codes to the remote
control supplied for this receiver to operate your DVD
recorder. For details, refer to the manual supplied with the
DVD recorder.
Initial setting: 3
1
Set the mode selector to “DVR.”
2
Press and hold DVR/DVD .
• Keep the button pressed until step 4 is finished.
3
Press DVR/DVD.
4
Enter the remote control code you want
using the numeric buttons (1 – 4, 0).
EX.: To enter the code “2,” press 0, then 2.
Code for DVR Number to enter
1 01
2 02
3 03
4 04
5
Release DVR/DVD .
Now, the remote control code has been changed.
To operate the DVD
recorder, set the mode
selector to “DVR.”
To operate the DVD
player, set the mode
selector to “DVD.”
You can always perform the following operation:
DVR/DVD : Turn on or off the DVD recorder or DVD
player.
After pressing DVR/DVD, you can perform the following
operations on the DVD recorder and DVD player.
3: Start playback.
7: Stop playback.
8: Pause playback. To release it, press 3.
¢: Skip to the beginning of the next chapter.
4: Return to the beginning of the current (or
previous) chapter.
¡: Fast-forward playback.
1: Fast-reverse playback.
TOP MENU/MENU: Display the menu recorded on discs.
5/∞/3/2: Select an item on the menu screen.
SET: Enter the selected item, channel number,
chapter/title number, or track number (if
required).
Only for DVD recorder operations:
CHANNEL +/–: Change the TV channel numbers on the
DVD recorder.
1 – 9, 0: Select a TV channel number (while
stopped) or a chapter/title number, track
number (while playing back). Press SET to
enter the number.
Only for DVD player operations:
1 – 10, 0, h10: Select a chapter/title number, track
number, menu item, etc.
If these buttons do not function normally, use the
remote control supplied with your DVD recorder or DVD
player. Refer also to the manual supplied with the DVD
recorder or DVD player for details.
48
45-55_Others.indd 48 45-55_Others.indd 48 06.6.27 2:45:04 PM 06.6.27 2:45:04 PM