JVC RX-D412BUJ - Manual (Page 28)

XM Satellite Radio
operations
NOTE
When you have selected “XM” by using SOURCE SELECTOR on the
front panel, the remote control may not work for XM Satellite Radio
operations. To use the remote control for the XM Satellite Radio
operations, select “XM” by using the XM button on the remote
control.
This is an XM Ready® receiver.
• Before operating, refer also to the manual of your XM
Passport System (not supplied).
7 About XM Satellite Radio
XM Satellite Radio is a satellite radio service with digital-
quality sound and over 170 digital channels, the most
commercial-free music in satellite radio services, live concerts
plus exclusive original programming, the biggest names in
news, talk, and entertainment, the most sports play-by-play
including Major League Baseball®. For the latest channel
listings and programming information, or to sign up, visit
.
XM Ready® is a registered trademark of XM Satellite Radio
Inc. All rights reserved.
Major League Baseball® is a registered trademark of Major
League Baseball Properties, Inc.
For SIRIUS Satellite Radio operations, see page 47.
Preparation
To listening to XM Satellite Radio, you need the following:
– The XM Passport System*
1 (not supplied)—XM Passport and
XM Passport Home Dock
– Subscription to XM Satellite Radio* 2
* 1 To connect the XM Passport System with this receiver, see
page 7.
* 2 The following channels are available without subscription:
– Channel 0: This channel is for checking the XM Satellite
Radio ID code.
– Channel 1: This is “XM Preview” channel.
How to subscribe
XM Satellite radio is a subscription service.
To subscribe to the XM Satellite Radio, visit the XM Satellite
Radio’s web site at , or you
can call 1-800-XM-RADIO (1-800-967-2346).
For subscription, you need to have the XM Satellite radio ID
code. To check the ID code, follow the procedure below:
How to check the XM Satellite Radio ID code
After connection:
1
Press XM on the remote control or turn
SOURCE SELECTOR on the front panel to
select “XM” as the source.
2
Tune in to “Channel 0” (see “To tune in to
channels” on page 27) to check your XM
Satellite Radio ID code.
The display alternately shows “RADIO ID” and the 8-digit
(alphanumeric) ID code.
To cancel the ID code display
Select any channel other than “Channel 0.”
Listening to the XM Satellite Radio
1
Press XM on the remote control or turn
SOURCE SELECTOR on the front panel to
select “XM” as the source.
The last received channel is tuned in.
“XM” appears and then the channel name appears on the
display.
2
Tune in to the desired channel.
You can tune in to channels with one of the following
methods:
– Channel Search
– Category Search
– Direct Channel Access
For details, see “To tune in to channels” on page 27.
Channel number Channel name
26
24-28_Radio.indd 26 24-28_Radio.indd 26 06.6.27 2:41:39 PM 06.6.27 2:41:39 PM