JVC TH-A75 - Manual (Page 65)

61
Procedure for connection
1 If you have already plugged your VCR, TV
and the center unit into the AC outlets,
unplug their AC power cords first.
2 Connect the VCR, TV and the center unit
using AV COMPU LINK cords (one cord is
supplied).
• See “Connection 1” on the previous page.
3 Connect between the audio output jacks on
the VCR and the VCR AUDIO IN jacks on
the center unit using the audio cord.
• See page 13.
4 Connect the video input/output jacks on the
VCR, TV and the center unit.
• See “Connection 2” on the previous page.
5 Plug the AC power cords of the VCR, TV
and the center unitt into the AC outlets.
6 When turning on the TV for the first time
after the AV COMPU LINK connection, turn
the TV volume to the minimum using the TV
volume control on the TV.
7 Turn on the connected components first,
then turn on the center unit.
• When turning on the VCR, use the remote control
supplied with this system–press VCR .
Available functions
The AV COMPU LINK remote control system allows you to
use the functions listed below.
One-touch video play
Simply by inserting a video cassette without its safety tab into
the VCR, you can enjoy the video playback without setting
other switches manually. This system automatically turns on
and changes the source to VCR .
The TV automatically turns on and changes the input mode to
the appropriate position so that you can view the playback
picture.
When you insert a video cassette with its safety tab, press the
play (
3) button on the VCR or on the remote control. So, you
can get the same result.
One-touch DVD play
Simply by starting playback on the built-in DVD player, you
can enjoy the playback without setting other switches
manually. The TV automatically turns on and changes the
input mode to the appropriate position so that you can view
the playback picture.
Automatic selection of TV’s input mode
When you select DVD, VCR, or DBS as the source to play on
the center unit, the TV automatically changes the input mode
to the appropriate position so that you can view the playback
picture.
Automatic Power On/Off
The TV and VCR turn on and off along with the center unit.
When you turn on the center unit;
• If the previously selected source is “DVD,” only the TV will
turn on automatically.
• If the previously selected source is “VCR ,” the TV and VCR
will turn on automatically.
When you turn off the center unit, the TV and VCR will turn off.
NOTE:
If you turn off the center unit while recording on the VCR, the VCR will
not turn off, but continue recording.
EN60-70.TH-A75[A]_f 02.10.11, 2:57 PM 61