JVC TH-A75 - Manual (Page 27)

23
2 Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
3 Press the number buttons (1–10, +10) to
select a channel number while the channel
number position is flashing.
The channel number and the CH indicator start flashing.
Ex.:
• For channel number 3, press 3.
• For channel number 14, press +10 then 4.
(For FM stations only)
• For channel number 24, press +10, +10, then 4.
• For channel number 30, press +10, +10, then 10.
4 Press MEMORY again while the selected
number is flashing on the display.
The selected number stops flashing.
The station is assigned to the selected preset number.
5 Repeat steps 1 to 4 until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a already used number erases the
previously stored one.
7 To tune in to a preset station
From the remote control ONLY:
1 Press FM/AM repeatedly to select the band.
Each time you press the button, the band alternates
between FM and AM.
2 Press the number buttons (1–10, +10) to
select a preset channel number.
Ex.:
• For channel number 3, press 3.
• For channel number 14, press +10 then 4.
(For FM stations only)
• For channel number 24, press +10, +10, then 4.
• For channel number 30, press +10, +10, then 10.
Selecting the FM reception
mode
When a stereo FM program currently tuned in is noisy, you
can change the FM reception mode to improve the reception.
• You can store the FM reception mode for each preset
station. See “Using preset tuning” on page 22.
L
S.WFR
R
CH
TUNED ST AUTO MUTING
From the remote control ONLY:
SLEEP
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
FM MODE
7 8 9
10 0 +10
100+
–
+
–
+
SURR-L SURR-R S-BACK
–
+
ADJUST
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Press FM MODE while listening to an FM
station.
The FM reception mode appears on the display.
Each time you press the button, the FM reception mode
alternates between “AUTO MUTING” and “MONO.”
• AUTO MUTING:
When a program is broadcast in stereo, you will hear it in
stereo.
When in monaural, you will hear as monaural. This mode is
also useful to suppress static noise between stations. The
AUTO MUTING indicator lights up on the display.
• MONO:
Reception will be improved although you will lose the
stereo effect. In this mode, you will hear noise until you are
tuned in to a station. (The AUTO MUTING indicator also
goes off.) The ST indicator goes off from the display.
Reducing the noise of AM
broadcast
When listening to an AM broadcast with noise interference,
you can change the Beat Cut mode to reduce the noise.
From the remote control ONLY:
SLEEP
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
FM MODE
7 8 9
10 0 +10
100+
–
+
–
+
SURR-L SURR-R S-BACK
–
+
ADJUST
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Press FM MODE while listening to an AM
station.
The current Beat Cut mode appears on the display window.
Each time you press the button, the Beat Cut mode alternates
between “BEAT CUT 1” and “BEAT CUT 2.”
• Choose “BEAT CUT 1” or “BEAT CUT 2” whichever gives
you clearer sound.
EN22-23.TH-A75[A]_f 02.10.11, 2:53 PM 23