JVC TH-A75 - Manual (Page 28)

24
Some of the following settings are required after connecting
and positioning your speakers, while others will make
operations easier.
• You can also set following speakers setting using the choice
menu except “EX/ES,” “PHASE” and “M.OUT” (see pages 55
and 56).
1 Press SETTING/ADJUST once.
“SETTING” appears on the display.
• Each time you press SETTING/ADJUST, the function for
the button changes as follow.
SETTING \ ADJUST \ current source \
(back to the beginning)
2 Press Cursor ∞/5 repeatedly to select the
item you want to set while “SETTING”
appears on the display.
• Each time you press the button, the item shown on the
display changes as follow:
FRNT SP “ CNTR SP“ SURR SP“ BACK SP “
EX/ES “ FRNT D “ CNTR D “ SURR D “
BACK D “ CROSS “ PHASE “ M.OUT “
(back to the beginning)
L
S.WFR
R
Operating procedure
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
From the remote control ONLY:
CAUTION:
When using the supplied speakers, select “SMALL” for
each. Selecting “LARGE” will damage the speakers.
NOTES:
• If you have selected “SMALL” for the front speakers, you cannot select
“LARGE” for the center, surround, and surround back speakers.
• If you have selected “SMALL” for the surround speakers, you
cannot select “LARGE” for the surround back speaker.
Selecting the channel number to
reproduce multi-channel digital
software
—EX/ES
You can select 5.1-channel or 6.1-channel reproduction to
play back multi-channel (more than 5.1-channel) digital
software when the size of the surround back speaker is set to
“LARGE” or “SMALL” (see the left). “AUTO” is initial setting.
Select one of the following settings.
AUTO :Select to reproduce signal originally recorded.
• When playing back Dolby Digital EX software (bearing
the mark ), “DOLBY D EX (Dolby Digital EX)” is
activated using the surround back speaker.
• When playing back Dolby Digital 5.1-channel software,
“DOLBY D (Dolby Digital)” is activated without using
the surround back speaker.
• When playing back DTS-ES Discrete software (bearing
the mark ), “ES DSCRETE (DTS-ES Discrete)” is
activated using the surround back speaker.
• When playing back DTS-ES Matrix software (bearing
the mark ), “ES MATRIX (DTS-ES Matrix)” is
activated using the surround back speaker.
• When playing back DTS Digital Surround 5.1-channel
software, “DTS (DTS Digital Surround)” is activated
without using the surround back speaker.
ON :Select to activate 6.1-channel reproduction using
the surround back speaker.
• When playing back Dolby Digital EX software, “DOLBY
D EX (Dolby Digital EX)” is activated using the surround
back speaker.
• When playing back Dolby Digital 5.1-channel software,
“DOLBY D EX (Dolby Digital EX)” is activated using the
surround back speaker. Surround back channel is
reproduced from surround signal.
• When playing back DTS-ES Discrete software, “ES
DSCRETE (DTS-ES Discrete)” is activated using the
surround back speaker.
• When playing back DTS-ES Matrix software, “ES
MATRIX (DTS-ES Matrix)” is activated using the
surround back speaker.
• When playing back DTS Digital Surround 5.1-channel
software, “DTS + NEO:6” is activated using the
surround back speaker. Surround back channel is
reproduced from surround signal.
OFF :Select to activate 5.1-channel reproduction without
using the surround back speaker.
• When playing back Dolby Digital EX software or DTS-
ES software, the surround back signal is output from the
surround speakers mixed with the surround signals.
• When playing back Dolby Digital or DTS Digital
Surround 5.1-channel software, conventional “DOLBY D
(Dolby Digital)” or “DTS (DTS Digital Surround)” is
activated.
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
FM MODE
10 0 +10
100+
–
+
–
+
SURR-L SURR-R S-BACK
–
+
ADJUST
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Ex.: “FRNT SP” is selected.
3 Press Cursor 3/2 repeatedly to select the
appropriate setting for the item.
Your setting is stored.
Setting speaker sizes
—FRNT SP (front speaker), CNTR SP (center speaker),
SURR SP (surround speaker),
BACK SP (surround back speaker)
Select the sizes for each speaker.
LARGE :Select when the cone speaker size is larger than
12 cm.
SMALL :Select when the cone speaker size is smaller than
12 cm.
NO :(Only for “BACK SP”) Select when no speaker is
connected.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Basic settings
EN24-26.TH-A75[A]_f 02.11.15, 9:09 AM 24