JVC TH-A75 - Manual (Page 60)

56
¶ CROSS OVER
Small speakers cannot reproduce the bass sounds
efficiently. If you use a small speaker in any position, this
system automatically reallocates the bass sound elements
assigned to the small speaker to the large speakers.
To use this function properly, set the crossover frequency
level according to the size of the small speaker connected.
• If you have selected “LARGE” for all speakers, this
function will not take effect.
• You can also set the crossover frequency using
SETTING/ADJUST button on the remote control (see
page 25).
Select one of the following settings:
80Hz : Select when the cone speaker unit built in the
speaker is about 12 cm.
100Hz : Select when the cone speaker unit built in the
speaker is about 10 cm.
120Hz : Select when the cone speaker unit built in the
speaker is about 8 cm.
150Hz : Select when the cone speaker unit built in the
speaker is about 6 cm.
200Hz : Select when the cone speaker unit built in the
speaker is less than 5 cm.
CAUTION:
When using the supplied speakers, select “200Hz.”
NOTE:
Crossover frequency is not valid for the HEADPHONE mode.
¶ RETURN TO INITIAL
Select this to reset all speaker settings to the initial
values.
OTHERS menu
¶ RESUME
If you turn off the power while playing back a disc, the
position where the playback has been stopped is stored.
You can activate or deactivate the resume playback
function.
The RESUME indicator lights up on the display when
turning on the system if the resume function is activated.
To resume playback from that position, press DVD or PLAY
on the remote control.
• The resume playback function does not work for Audio
CDs.
Select one of the following settings:
ON : Select to activate this function.
OFF : Select to deactivate it.
¶ ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons.
Multi view angle :
Subtitle :
Audio language :
Playback status : , , x2 , etc.
The guide icons appear on the TV at the beginning of the
operation with this function turned on.
Select one of the following settings:
ON : Select to activate this function.
OFF : Select to deactivate it.
• Subtitles (see page 37) and the information for zooming
in (see page 42) appear on the display even though this
setting is “OFF.”
¶ AUTO STANDBY
When disc playback on the built-in DVD player ends and
no operation is done for more than the specified time (60 or
30), the system is turned off automatically.
• This function takes effect only when DVD is selected as
the source.
Select one of the following settings:
60 : Turns off the system if no operation is done for
60 minutes.
30 : Turns off the system if no operation is done for
30 minutes.
OFF : Select to deactivate the function.
• If the sleep timer (see page 18) and Auto Standby are
used at the same time, the one with the earlier shut-off
time will turn off the system.
¶ PARENTAL LOCK
Select this to enter the PARENTAL LOCK sub-menu.
You can restrict playback of a DVD containing violent
scenes and those not suitable for your family members.
(see “Restricting playback—Parental Lock” on page 57 for
the detailed operations.)
• You can select “PARENTAL LOCK” only before playback.
ON
OTHERS
RESUME
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
PARENTAL LOCK
USE TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
SELECT
Using the choice menu
EN50-59.TH-A75[A]_f 02.10.11, 2:56 PM 56