JVC TH-A75 - Manual (Page 64)

60
AV COMPU LINK remote control system
The AV COMPU LINK remote control system allows you to operate JVC TVs and VCRs through
the center unit.
This system is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s
video components through the video components terminals. To use this remote control system,
you need to connect the video components you want to operate, following the diagrams below
and the procedure on the next page.
• Refer also to the manuals supplied with your video components.
Connection 1: AV COMPU LINK connection
TV
AV COMPU
LINK-
STANDBY
COMPACT SUPER VIDEO D I G I T A L • E X P R O L O G I C
D V D D I G I T A L C I N E M A S Y S T E M PROGRESSIVE
PHONES
SOURCE − VOLUME +
AV COMPULINK
AV
COMPU LINK EX
AV
COMPU LINK- ΙΙΙ
VCR
AV COMPU LINK cord
CAUTION:
When connecting the TV with the AV COMPU LINK
remote control system, connect the center unit to the
AV COMPU LINK III or AV COMPU LINK EX terminal.
DO NOT connect the center unit to the AV COMPU LINK
RECEIVER/AMP terminal.
Connection 2: Video cord connection
Connecting TV and VCR
Connect the center unit to the TV and VCR through the same video terminals using one of the following:
RGB YC
AV COMPU LINK-
S-VIDEO
VCR IN DBS IN OUT
VIDEO
To S-video
output
S-video cord
VCR
To Video
input 1
TV
S-video cord
RGB YC
AV COMPU LINK-
S-VIDEO
VCR IN DBS IN OUT
VIDEO
Composite
video cord
To
composite
video output
VCR
To Video
input 2
TV
Composite
video cord
• If the TV and VCR are equipped with S-video terminals
Connecting TV only
Connect the TV using composite video cord, S-video cord or component video cord.
• If the TV and VCR are equipped with composite video
terminals
RGB YC
AV COMPU LINK-
S-VIDEO
VCR IN DBS IN OUT
VIDEO
S-video cord
To Video
input 2
TV
Composite
video cord
To Video
input 1
COMPONENT VIDEO OUT
Y P B P R
To Video
input 2
Component
video cord
NOTES:
• When connecting the center unit and a TV with the AV COMPU
LINK EX terminal by using a component video cord, you cannot
use the automatic selection of TV’s input mode (see page 61).
• To use the automatic selection of TV’s input mode correctly (see
page 61), select the correct “M.OUT” setting (see page 25).
EN60-70.TH-A75[A]_f 02.10.11, 2:57 PM 60