JVC TH-A75 - Manual (Page 50)

46
MP3 disc playback
This system can play MP3 tracks (files) recorded on a CD-R or CD-RW. We call such a disc “MP3 disc” in this manual.
• Before using the remote control, press DVD to change the remote control operation mode for the MP3 disc
operations.
• When playing back an MP3 disc, set “MP3/JPEG” on the PICTURE menu of the choice menu to “MP3” (see page 53).
• Turn on your TV, and select the correct input mode on the TV.
If “ ” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.
7 NOTES for MP3 disc
• MP3 discs (either CD-R or CD-RW) require a longer read-
out time. (The time differs depending on the complexity of
the group (folder)/track (file) configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This system supports “multi-session” discs (up to 5
sessions).
• This system can not play “packet write” discs.
• This system can play MP3 files only with the following file
extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• ID3* tags cannot be shown on the display.
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There
are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3
Tag version 2).
• It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps. This
system cannot play back files recorded at the rate of under
64 kbps.
• If both MP3 files and JPEG files are recorded on a disc, set
the MP3/JPEG setting on the PICTURE menu to “MP3.”
(See page 53.)
• Some MP3 discs may not be played back because of their
disc characteristics or recording conditions.
7 To start playback
Load an MP3 disc, then press PLAY.
The system starts playback.
The following information appears on the display, and the
MP3 CONTROL screen (see page 47) appears on the TV.
CHANNEL/ZOOM VOLUME TV VOL
TUNING
STOP
DIMMER
PAUSE
FF/ /REW
TV/VIDEO
1
MUTING
¡
REC
PLAY
DOWN UP
MEMORY STROBE
ENTER
ON
SCREEN
CHOICE
O.T.
REPLAY
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
To stop playback temporarily
Press PAUSE (or 8 on the center unit).
To start playback again, press PLAY (or 3 on the center unit).
To skip groups forward
Press Cursor
3.
To skip groups backward
Press Cursor
2.
To skip tracks forward
Press FF/
¢ or Cursor ∞ (or ¢ on the center unit) as many
times as required.
To skip to the beginning of the current track
Press
4/REW (or 4 on the center unit) once.
To skip tracks backward
Press
4/REW or Cursor 5 (or 4 on the center unit) as
many times as required.
To stop playback completely
Press STOP (or 7 on the center unit).
L
S.WFR
R MP3
Basic operation
NOTES:
• The following functions are not available for MP3 disc
playback:
Program play, random play, repeat play,
fast-forward/reverse playback, and using on-screen bar
and choice menus
• Some tracks on an MP3 disc are skipped and may not be
played back normally.
From the remote control ONLY:
MP3 indicator Current track number
Current group
number Elapsed playing time
of the current track
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN46-49.TH-A75[A]_f 02.10.11, 2:56 PM 46